Your pipes may be at risk of freezing due to a rapid drop in temperature, and this leads to many difficulties. When the pipe bursts in this condition, more dirt accumulates.

It is very important to thaw your frozen water pipe immediately and even more important to thaw it correctly. It is recommended by professionals to help prevent water flowing and potentially damaging flooding from a cracked pipe on your property. So the first thing you need to do is check the frozen pipe and know the disadvantages of defrosting it first. Here we are providing Some popular useful tips on thawing frozen pipes that are recommended for all by our professional plumbers.

Some Useful Tips on Thawing Frozen Pipes.

Tip 1: Inspect Frozen Pipe

It is necessary to locate the frozen pipe several times. Firstly, open all the taps in the house. If water doesn't reach a tap, find its plumbing lines, and it can go off the fixture. Inspect the plumbing with your hands a few feet until the affected area is located. You

Tip 2: Check Main Water Supply

Once a frozen pipe has been detected and confirmed, go to the main water supply valve. Turn it clockwise to its "off" position by going over the valve. Then all the sink taps and tub spouts can be opened in the house. This will remove the remaining part of the water from the system.

Tip 3: Use Hair Dryer

Most people typically use things like heating pads, lamps, hair dryers, etc. So, for frozen pipes use heat, because low-tech techniques are similarly effective. Pour warm water and towel over it, and drop onto the frozen spot. It is a very vital heat source in your technique. In this tip, the heating can escape any steam/water generated by the pipe. Do heat continuously, with frozen pipe do one section in inching promptly.

Tip 4: Turn on/off Water Supply

When you are ensuring that the freeze has melted, so the main water supply valve and partially turn on. Then visit back on the pipe and check for leaks. If it damages, turn off the supply again. Run the water supply if you feel that the pipe is letting the water flow properly. Close the open spout or tap. You need to note that you should not melt a pipe using a propane torch, as it not only damages the pipe, it can also set your property on fire.

Tip 5: Near the Water Meter

If the frozen pipe has burst, immediately turn off the main pipe supply to the house. Otherwise, it can cause excess water to overflow and damage your property. Remember that every single property and unit of yours must have a shut-off valve. Small shut-off valves are usually located near toilets and sinks. But the water meter can often be located near the main shut-off valve.

Anytime, to prevent this situation, you can use these tips to protect your at-risk pipes. If the pipe has burst, cannot melt, or are unable to locate the pipe, you can immediately contact a plumber and get their help. Emergency plumber service will be able to solve any kind of problem you have.