Duct cleaning increases the amount of work done by the system. The dust laden duct network cuts off the supply of air circulating, which makes the system work more hard than before.

So, Here we will be providing a complete guide to air conditioning duct cleaning. There is a list of equipment that one usually requires while they are cleaning the air duct or vents. Let’s see to it once. 

One should always use heavy duty gloves and goggles to avoid any kind of injuries while cleaning the duct. Safety must be the first priority. A long piped vacuum of appropriate length to reach the duct without any stretching or supporting. A heavy-duty brush to clean the loose dirt. So, A drill to remove the screws in the duct. 

1. Remove the screws 

Also With the help of a power drill, remove the screws of the inlet plate of the duct. Make sure the power is off.

2. Cover up 

It is necessary to cover up the entire section which is not being cleaned. Covering them will avoid the dust from travelling in or out of this section. It can be done simply by lifting the duct plate and covering it up with the paper or tissues available with you. Make it necessary that all the screws and plate are in a specified position so that there is no difficulty while adjusting them in their place.

3. Loosen 

Tap on the cluster of dust helps in loosening. Just knock softly with a solid object without applying too much force. It is advisable to use the back of the brush to tap off the dust. Cover your face properly so that you do not inhale the particles suspended in the air.

3. Clean

Sweep out the collected dust into the supply register. It can also be done with the help of a vacuum cleaner. This process should be done very slowly so that all the dust and debris is swept out properly. 

4. Supply register

It may happen that the dust might stick to the supply register. It is important to clean them properly. First with the help of a brush clean it softly and then use a moist cloth or tissue to wipe out the remaining particles. 

5. Blower compartment

When the power is off, the blower compartment can be accessed. Now, use the vacuum cleaner to clean the blower compartment, which may have a cluster of dust left on it. Now only the furnace fan is left. Clean it properly with the brush. So, Avoid using wet cloth or damp tissue since it is the most important part of the system. If you want to know Common Reasons to Not Miss Your Annual Residential Air Duct Cleaning then read our blog.

6. Furnace filter 

Now replace the furnace filter designed for the duct. Use a specific filter recommended by the company. Using a temporary filter requires changing frequently in months. So, Use a permanent filter that is replaceable and washed easily. You can check our blog on Tips To Prevent Air Duct Contamination.

Vent duct cleaning has various advantages. It helps to build a cleaner breathing environment. It improves the quality of air we breathe in. So, It also increases the efficiency of the system, which saves a lot of bucks. In any case, call our Duct Cleaning Melbourne experts to save you from various problems caused by the improper functioning of ducts. We can fix it for you!