Molds are the most nuisance-causing things in any heating and cooling system. The heating and cooling systems have humidity and airflow that makes it the most congenial environment for mold to thrive. 

The mold growth can also be accelerated if the ducts in your heating and cooling system have leaks. Even minor leaks make the condition go worse. These mildew love to thrive on organic substances like wood, paper, some paints, or cloth fibers. So, these things are seen to get stuck as minute dust particles on the duct system. 

Here in this article, We will be clarifying how you can detect unwanted guests in your house earlier. Early interventions to their growth can help you get the condition under control. So, just follow the air duct cleaning steps.

Step 1: Use a screwdriver to open the vents in your wall. Look for the bigger dust and debris accumulated areas. You may find pet dander, cloth fibers, paper strips, or damaged fibers of insulation. They are also the most possible location for mold and mildew to deposit and form colonies. 

Step 2: You can test for the places of condensation using a white cloth and flashlight. Avoid using hands as they can be poisonous and sensitive to your skin. Wipe the interior of the vent with a white cloth and check for the damp locations. If you have had leakages in our ducts, the cloth will be a damper. These damped positions are the most viable location for mold to grow. 

Step 3: You can see the mold growth in the naked eye using a flashlight. They are seen in the form of black and white spots as cotton balls. If you find these signs, then you are at the correct place. 

In step 4: In case the mold growth is too severe; you can detect them through your nose while the air is flowing through the duct. These mold and mildew give off a musty odor on severe depositions. Otherwise, you can smell for some seconds inside the vent with air flowing. Don’t get exposed to mold smell for a long time. You can get allergies or breathing issues due to mold. 

Using a Mold and Mildew Detection Kit

You can find this kit in the market. It comes with a and a culture medium. Pour and leave the culture medium on the Petri dish until an hour or until it becomes solid. Keep the Petri dish in the most targeted location of mold infestation. You can check our blog on Why Proper Duct Cleaning Is Necessary.

Place the Petri dish in the vent for 10minutes. After that replace the lid on the Petri dish and let it sit for 48-96 hours. You will see fuzzy black and white spots if mold existed in that location. Send the test kit for testing in the manufacturer's lab. They can guide you regarding the type of infestation and measures you can take for solving the issue.  If you want to know What is The Safest Way To Clean Ducts? then read our blog.

Conclusion

People rarely give attention to replacing or renovating the duct cleaning in their house. As you move to a new house or flat, you must check for the condition of ducts and vents in the house. A duct system with mold and mildew in it is not going to last for long. You can get affordable Duct Cleaning Melbourne from Sam’s Duct Cleaning.